A fault with the siganalling system in the Selhurst area means some lines are disrupted. As a result, trains may be cancelled or delayed by up to 15 minutes. This is expected until 06:30.
Customer Advice:
We've recently been told about this incident, and we're working to get more information for you.
Your journey is likely to be disrupted, but we don't have an exact estimate for any delays at the moment.
You'll be able to see any further updates on this page, so please continue to check back here.
If you need to use another route, we'll let you know shortly.
You can use your ticket at no extra cost on:
- Southern and Thameslink service on any reasonable route towards your destination
Planning your journey:
Live departure boards can be found here.
You can view a live map of the network here.
You can also see an alternative route guide here.
Can you tell me more about the incident?
A track circuit failure will disrupt your journey in the Selhurst area.
This part of the network uses track circuits to detect the position of trains. These are electrical systems which monitor whether a train is on a section of track. They operate as part of the signalling system, which is designed to be "fail safe".
When a track circuit fails, the signalling system will interpret this as a train remaining in place, even though there may not be a train present at all, or the previous service may have long since left the area.
As a result, further trains cannot be automatically allowed onto the relevant section of track. Train drivers will be stopped by red signals on approach. They will then get verbal permission from the signaller so that they can proceed, and will run at a heavily-reduced speed as far as the next signal. This is so that the drivers will stop safely if they see anything ahead of them.
In some areas, the sections between signals can be several miles long, so this can result in delays building up. Even with shorter sections of track affected, there would still be a delay of at least a few minutes to each journey.
Track circuit faults can be caused by a number of different issues, including electronic faults or obstructions on the track. Network Rail manage the signalling system, including track circuits, and their staff will be investigating as quickly as possible.
Check before you travel:
You can check your journey using the National Rail Enquiries real-time Journey Planner.
Compensation:
You may be entitled to compensation if you experience a delay in completing your journey today. Please keep your train ticket and make a note of your journey, as both will be required to support any claim.